Xerox Sheet Feed Module SFM, Xerox Nuvera 100/120 Digital Copier/Printer, Large Format, Tray

Xerox Nuvera™ 100/120 Digital Copier/Printer Customer Expectations Document

Sheet Feed Module (SFM)

Item	Xerox Nuvera™ 100/120 Digital Copier/Printer
	Sheet Feed Module	(SFM)	Large Format
			Sheet Feed Module	(LFSFM)
	4 Tray
			2 Tray
Capacity	• Paper Input Capacity: 5800 sheets		• Paper Input Capacity: 3200 sheets
20 lb bond	--Tray 1: 1,600 sheets		--Trays 1 & 2: 1,600 sheets
(75 gsm)	--Tray 2: 3,100 sheets
	--Trays 3 & 4: 550 sheets each
Capacity	• Paper Input Capacity: 5565 sheets		• Paper Input Capacity: 3010 sheets
80gsm,	--Tray 1: 1505 sheets		--Trays 1 & 2: 1505 sheets
0.105 mm	--Tray 2: 3020 sheets
	--Trays 3 & 4: 520 sheets each
Minimum	• Trays 1 & 2		• Trays 1 & 2
Size	--Feed Direction: 5.5 inches (140 mm)		--Feed Direction: 7.17 inches (182 mm)
	--Across Feed Direction: 8.0 inches (203 mm)		--Across Feed Direction: 8.0 inches (203 mm)
	• Trays 3 & 4
	--Feed Direction: 7.17 inches (182 mm)
	--Across Feed Direction: 8.0 inches (203 mm)
Maximum	• Trays 1 & 2		• Trays 1 & 2
Size	--Feed Direction: 9.0 inches (229 mm)		-- Feed Direction: 18.5 inches (470 mm)
	--Across Feed Direction: 12.6 inches ( 320 mm)		--Across Feed Direction: 12.6 inches (320 mm)
	• Trays 3 & 4
	-- Feed Direction: 18.5 inches (470 mm)
	--Across Feed Direction: 12.6 inches (320 mm)
Media	• Bond, Bristol, cover, index, offset, recycled, vellum, tabs and Mylar tabs, transparencies, carbonless,
Types	labels, Never-Tear
	• Booklet envelopes: 6” x 9”, 7” x 10”, 162mm x 229mm (C5), 178mm x 254mm
	• Catalog envelopes: 6” x 9”, 7” x 10”, 162mm x 229mm (C5), 178mm x 254mm
Input	• Uncoated: 16 lb bond to 120 lb index (56 gsm to 220 gsm)
Weight	• Does not support coated stocks – image quality and performance (jams) maybe degraded
Feeding	Air shuttle		Air shuttle
System

COMMENTS.

•Auto tray switching & Load while run capability are supported. Do not open trays when the “Drawer in Use” light is lit.

•Statement tabs can only be output to the Top Tray in the finisher; they cannot be output to the Main Stacker.

•Booklet Envelopes should be fed with flaps closed and on long edge; flap side down.

•Catalog Envelopes should be fed with flaps open, towards operator, with glue side down..

•Trays do not feed to empty. When a feeder empty message is displayed, there could be as much as 80 sheets of stock remaining in the feeder tray (based on 20 lb. bond / 75 gsm). This is to maintain the best possible reliability in the feeder mechanisms.

•The use of Xerox media as listed earlier in this document is recommended. Because there is a difference in technology between offset and digital printing, there is a difference in media properties required for optimum performance with each technology. Xerox papers and specialty media are digitally

optimized (paper specs - smoothness, formation, electrical properties, etc., for optimal image quality, toner adhesion and performance, and also precision sheeted - less contamination, better registration for use in Xerox digital equipment.

•A second Sheet Feed Module (4-tray or 2-tray) can be installed in tandem with (and after) the standard

4-tray Sheet Feed Module. 4-Tray SFM

- 24 -