Xerox 120 manual Multifunction Finisher Standard & Professional, Sub-system Feature Comments

Xerox Nuvera™ 100/120 Digital Copier/Printer Customer Expectations Document

Multifunction Finisher: Standard & Professional

Two accessories are available. One is required for machine operation.

Standard Finisher

Top Tray / Offset Stacker / Stapler

•Envelopes and Statement size paper (5.5” x 8.5”) will be delivered only to the top tray.

•Staple locations for non-standard size papers (e.g., standard sizes are A4, Letter size, etc.) will be slightly asymmetrical. The staple will be located in the position appropriate for the next nearest paper standard paper size.

•Certain stocks (stocks with high clay content and / or composed of other high density materials) may reduce the number of sheets that can be stapled and / or result in miss-staples.

	Sub-system	Feature	Comments
	Top Tray	250 sheet capacity (20 lb. bond)
		5.5” x 8.5” to 12.6” x 18.5”
	Main Stacker	2000 sheet capacity	• Output is normally delivered 1-n, face
		5.83” x 8.0” to 12.6” x 18.5”	down to the main tray; jobs can be
			programmed for face up delivery if
			desired but stapling position &
			orientation will not be optimal
			• The system will cycle down when the
			stacker is full; overflow will not go to the
			top tray
			• Sizes can be mixed in the stacker,
			however mixed size stacks should be
			closely monitored to ensure stack
			stability
			• The maximum stack size capability is
			degraded for thin stapled sets.
	Stapler	• Staples up to 100 sheets 20 lb. bond of paper	• The number of sheets that can be stapled
		sized 8.5” x 14” or less with 100 sheet staple	will decrease in relationship to the weight of
		cartridge loaded	the paper.
		• Staples up to 50 sheets 20 lb. bond paper sized	• Does not staple tabs or transparencies
		8.5” x 14” or less with 50 sheet staple cartridge
			• The staple placement on the page is shown
		loaded
			on the controller
		• One or Two Staples
Other 100-sheet stapler cartridge typical minimum capabilities:

-70 sheets for 28lb (105 gsm) of paper sized 8.5" x 14 or less

-30 sheets for 80lb cover (216gsm), all paper sizes

-20 sheets for 28lb (105gsm) Color Expressions and equivalent papers, all paper sizes

Other 50-sheet stapler cartridge typical minimum capabilities:

-35 sheets for 28lb (105 gsm), all paper sizes (including CX and equivalent papers)

-15 sheets for 80lb cover (216gsm), all paper sizes

-20 sheets for 28lb (105gsm) Color Expressions and equivalent papers

Staple Cartridge Limitation: The machine software does not distinguish between the 50 sheet staple cartridge and the 100 sheet staple cartridge. This means that if the 50 sheet staple cartridge is loaded in the machine, and a job with more than 50 sheets is sent to be stapled, a mis-staple or stapler jam will probably occur. If the 50 sheet staple cartridge is used, it is the responsibility of the operator to ensure that jobs exceeding 50 sheets are not submitted for stapling.

- 29 -