Xerox manual Xerox Nuvera 100/120 Digital Comments

Xerox Nuvera™ 100/120 Digital Copier/Printer Customer Expectations Document

Professional Finisher

Includes capabilities above plus a booklet maker, and

Z-fold / C-fold

•Top Tray / Offset Stacker / stapler: Same capabilities & limitations as above

This product is not DFA compatible.

Item	Xerox Nuvera™ 100/120 Digital	Comments
	Copier/Printer w/ Professional Finisher
Top Tray	• Same as Standard Finisher
Main Stacker	• Same as Standard Finisher
Stapler	• Same as Standard Finisher
Booklet maker	• C – fold	• C - fold and Z- fold weight range is 16 to
	1 sheet Letter and A4 sizes	32 lb. (60 to 120 gsm)
	• Z – fold
	1 sheet Letter and A4 sizes
	• Bi – fold	• Bi-fold & Booklet sheet capability is
	5 sheet capacity (20 lb. stock), Letter (8.5” x	reduced with heavier stocks
	11”), A4, Foolscap (8.5” x 13”), Legal (8.5” x
	14”), Ledger (11” x 17”) and A3 sizes.
	• Booklets – Dual Staple	• No face trim
	15 sheet capacity (20 lb. stock), Letter (8.5” x	• No Engineering folder
	11”), A4, Foolscap (8.5” x 13”), Legal (8.5” x	• No hole punch
	14”), Ledger (11” x 17”) and A3 sizes.

Note: When using the booklet maker, some pre-printed cover sheets may exhibit tear-off from the stapled booklet, depending on the pre-printed ink area coverage and ink type. It is advisable to verify your application prior to production.

Stack Quality

The maximum stack scatter is 25.0 mm or less for:

-Unstapled sets

-Stapled sets greater than 20 sheets

The maximum stack scatter is 60.0 mm or less for:

-Stapled sets less than or equal to 20 sheets

-Stack size maybe limited for stapled sets less than or equal to 20 sheets

Within Set Registration

See Tables 1 & 2 for specification, below. Figure 1 details the correct measurement technique

- 30 -