Headset features
Headset controls | Now that you’ve assembled your headset, installed the software and |
| connected your phones, read this section to learn about the headset |
| features, how to use the controls and more. |
1Volume/Mute button
Increase the volume Decrease the volume Mute/unmute a call Flash between calls
Press the volume button up Press the volume button down
To mute/unmute the headset, press the volume/mute button in During a call, long press the volume button up or down for 1.5 seconds
2Call button
Place, answer, end a call Short press the call control button
3Headset LED Flashes white when in use
For your safety, do not use headset at high volumes for extended periods of time. Doing so can cause hearing loss. Always listen at moderate levels. For more information on headsets and
hearing visit www.plantronics.com/healthandsafety .
Headset power If the headset battery is installed and charged, the headset is automatically on. The headset does not have an on/off button. If you won’t be using the headset for a long period of time and the headset will not be in the charging cradle, place the headset in sleep mode or remove the battery.
Place the headset in sleep mode
Placing the headset in sleep mode with a fully charged battery will provide up to 50 hours of standby time.
1While the headset is idle, press the call button for three seconds until you see the headset flash white twice.
2To wake the headset, press the call button again until you see two white flashes or hear three high tones.
Battery storage time
If you remove a fully charged battery from the headset, it will provide up to 75 days of battery storage time, stored under normal conditions.
Talk time
With a single full charge, the headset will provide up to 7 hours of continual talk time in narrowband mode. Talk time will be reduced when operating in wideband mode and/or if the headset is used consistently at a long distance from the base. You can replace the battery mid-
18
