Advanced Features and Troubleshooting Manual 87
Control Panel Messages
Control Panel Messages
When the printer’s control panel displays a message, find the message in the following
table listed in alphabetical order. If there is a problem, perform the corrective action for
resolving the problem. If the problem persists, check the Xerox troubleshooting knowledge
database on the web at: www.xerox.com/officeprinting/infoSMART/ or contact your
Customer Support Center.
Error Description and corrective action
All Jobs
Delete
Appears when using the secure print feature.
Press the Enter key (labeled 4) to delete all secure jobs in your queue.
Press the Value keys (labeled 3 or 7) to toggle between Delete and
Print.
All Jobs
Print
Appears when using the secure print feature.
Press the Enter key (labeled 4) to print all secure jobs in your queue.
Press the Value keys (labeled 3 or 7) to toggle between Delete and
Print.
Canceling Job...
<Job Name>
Tells you that a job is being cancelled.
Clear Paper Path Appears following an initial paper jam message.
Remove any jammed paper from the exposed paper path, close the covers
and trays, then refer back to the control panel for further messages.
Close Covers The top or rear cover is open.
Close the open cover to resume printing.
Close Stacker Door The Stacker Bin’s rear door is open.
Close the door to resume printing.
Close Tray 2 Rear
Door
The printer cannot feed from the 2,000-Sheet Feeder when installed as Tray
2, because the rear tray is open.
Close the door to resume printing.
Close Tray 3 Rear
Door
The printer cannot feed from the 2,000-Sheet Feeder when installed as Tray
3, because the rear tray is open.
Close the door to resume printing.
Delete All Jobs Appears when using the Reset Menu to delete secure and proof jobs from the
hard disk.
Press the Value keys (labeled 3 or 7) to toggle between Yes and No.
Select Yes and press the Enter key (labeled 4) to delete the jobs.
Select No and press the Enter key to exit without deleting the jobs.
Delete All Jobs
Disk Locked
Deleting all jobs from the disk has failed, because the disk was locked via a
PJL or SNMP command or through CentreWare Internet Services. It will be
necessary to unlock the disk before deleting all jobs.
Deleting...
<Job Name>
Tells you that the secure and proof jobs you asked to delete (in the previous
message) are being deleted.