CC-13 Troubleshooting

Fiery XJ Spooler problems

Fiery XJ Scan does not let you
scan at full resolution
Click Prescan and then set the resolution.
The Fiery SI scans at full resolution for an area that is about 25 square inches. When you
select an area smaller than about 25 square inches, the Max value increases in the dialog
box, and you can set a higher resolution.
If this happens: Try this:
You can’t move or delete jobs
in the Macintosh Fiery XJ
Spooler
Choose Password from the Administrator menu and enter the password that was created
on the Fiery SI Control Panel. If you do not enter the password, you can only move,
override settings for, and delete your own jobs.
If this happens: Try this: