A
A-1 Error Messages
When an error interferes with printing, you will see a message on the Fiery SI Control
Panel. Following are the messages (listed in alphabetical order), with the appropriate
corrective action for each one.
Message Corrective action/additional information
Accessory disabled One of the copier’s accessories is disabled.
Busy The Fiery SI has received a print job, but the copier is
busy. The job will print when the copier resumes printing.
Check power & cable There is a problem with the copier power or cable
connection. First check to make sure that the copier is
turned on. There may also be a problem with the cable
connection between the Fiery SI and the copier. Make sure
that the cable has not come loose. The Fiery SI will resume
printing when the cable is securely connected to both the
Fiery SI and the copier.
Copier needs attn There is an unidentified problem with the copier. See the
copier user interface for additional messages. The copier
will resume printing when the problem is corrected.
Copier offline The Suspend Printing option has been selected from the
Function menu. Press Resume Printing in the Functions
menu to reconnect the Fiery SI to the copier.
Copier running The copier is in use scanning or making a copy.
Disk full The internal Fiery SI hard drive is full. To make more
space available, open the Fiery XJ Spooler and delete
unnecessary jobs or use the Fiery XJ Downloader to
remove unnecessary fonts. If these do not work, you can
use the Clear Server command from the Control Panel.
Door open One of the doors on the copier is open. Close the door to
resume printing.
Fuser web empty The copier’s fuser web is empty. Printing will resume when
it is replaced.
Appendix A: Error Messages