xv System requirements for UNIX users
IPX (Novell)
With an IPX (Novell) network, you need a Novell file server running NetWare
software version 3.11 or later that supports Frame Ethernet 802.3 or 802.2, or
Ethernet II.
System requirements for UNIX users
To use the Fiery SI with a UNIX workstation, you need:
Workstations with Standard TCP/IP Ethernet connectivity supporting the lpr
protocol in compliance with RFC 1179
TCP/IP printing software that conforms to RFC1179 (Berkeley lpr protocol)
Specifications
The Fiery SI has the following features:
32MB RAM
CPU R4600/R4700, 100 MHz
Supports AppleTalk, TCP/IP, and IPX protocols simultaneously
Supports EtherTalk Phase 2
Supports thinnet (by transceiver), thicknet, and twisted pair cabling
Supports token ring networking with additional optional hardware
Supports Adobe PostScript Level 2 CPSI
Includes 39 PostScript fonts
You can use the Fiery XJ Downloader or any third-party LaserWriter downloader,
such as the Adobe Font Downloader, to download additional fonts
Built-in EFICOLOR color management
Internal 2.1GB hard disk drive.
For installation of Fiery SI system software—CD-ROM drive and 50-pin SCSI
cable to connect the drive to the Fiery SI’s SCSI port