2
2-4 Printing with Macintosh Computers
8. Click
Save
after you change the options to make the new settings your default
settings.
For information about these options, see Appendix D "Setting Job Overrides."
9. Click OK to accept your options, and click Print to print.
Printing pages from the bypass tray You can use the Fiery SI to print manually fed pages on the copier if you want to print
on special paper or transparencies. You can use the Fiery SI to print on 16–24 pound
paper (60–90 gsm), thick paper (28–32 pound/105–120 gsm) or Xerox-recommended
transparencies from the bypass tray. You can also use the bypass tray for paper sizes
such as A6 and 11” x 18” (model 5750 only).
There are several ways to print manually fed pages:
• From the Control Panel, you can set
Enable Bypass Tray as default
to
Yes
to print all
jobs from the Bypass Tray unless another tray is specified.
• From within the Fiery XJ Spooler, select a job, choose
Override Print Settings
and
set the
Bypass Tray
option to
On
.
• For many applications, you can use the following procedure and choose
Bypass Tray
in the Print or Page Setup dialog box.
T
O
PRINT
PAGES
USING
THE
BYPASS
TRAY
:
1. Make sure that the Use Bypass Tray option on the copier panel is set to No.
N
OTE
:
If you select
Bypass
as your paper supply on the copier, the copier will be in
Copier Mode and unavailable for printing.
2. Load paper or transparencies into the bypass tray.
You can load up to 40 sheets.
3. Press the Clear All button on the copier.