Printer components and options
•Alignment: Your finishing device align at the correct height without interference from protruding features. To accomplish this, you must consider the feature locations and the vertical alignment.
•Paper exit: The finishing device must align with this exit slot. Printed sheets travel through the printer output module and bypass transport, out of the paper exit, and into the finishing device. The paper exit slot is 16.75 inches (425.45 mm) wide.
•Module mobility: Your finishing device must be easy to move so that you can align it precisely.
The following figure illustrates the alignment and docking locations for the bypass transport on the printer (the bypass transport support is not shown).
Figure
1.Sheet registration edge
2.Sheet edge
3.Vertical slot to accept 13 mm
4.Floor
5.22 mm diameter docking zone
6.Center line of docking features
System Overview Guide |
