Xerox NPS, IPS, 4890, 4850, 92C manual Sun Ultra 60 workstation

Printer controller overview

6.Twisted-pair Ethernet (TPE) connector

7.IEEE 1394 connectors

8.Fibre Channel-Arbitrated Loop (FC-AL) connector

9.Audio module headphones, line-in, line-out, and microphone connectors

10.Graphics card / video connector (frame buffer 0)

11.PCI card slot 4

12.Graphics card / video connector (frame buffer not used)

13.PCI card slots 3 and 2

14.Power connector

15.PCI card slot 1

Keyboard The keyboard consists of alphanumeric keys similar to a typewriter, symbols and special character keys, an extended character set, and function keys. You can use the keyboard to make selections, and to enter commands that control functions such as requesting sample prints, or shutting down the system.

Mouse Use the mouse to select, move, or resize the windows.

Display monitor The 18.1-inch LCD monitor allows you to interact with the printer and to monitor its interaction with the various components. During a print job, printer error messages may display to notify you of any unexpected conditions.

NOTE: For information on channel-attached systems, refer to the chapter, “IPDS printing environment”.

NOTE: Printer controller hardware configurations are subject to upgrade.

Sun Ultra 60 workstation

A PCIM2 card for the Sun Ultra 60 is installed in the processor. The printer cable is connected to the processor. In addition, the processor contains the connectivity boards for Ethernet and optional Token Ring. The disk stores the operating system, the system software, and any buffered pages.

System Overview Guide 2-5