Xerox NPS, IPS, 4890, 4850, 92C manual Dry ink, Fuser lubricant, Developer

Models: NPS IPS 92C 4850 4890

1 90
Download 90 pages 53.85 Kb
Page 76
Image 76
Dry ink

Supplies

Dry ink

Dry ink (also called toner) is the powder which forms the image on the printed page. There are six cartridges of black dry ink or three cartridges of colored dry ink in each carton. You should keep at least one extra cartridge on hand at all times. The disposable cartridges are easily changed with no mess. The consumption rate of Xerox dry ink is approximately one cartridge per 30,000 pages for black dry ink and 86,500 pages for colored dry ink. Use only dry ink that is specified for use in the DocuPrint 4850/4890 printer, as described in the consumable supplies table.

NOTE: Dry ink (toner) yields are based on 5% area coverage for black dry ink and 1.5% area coverage for colored dry ink. Your yield may vary, depending on coverage.

Fuser lubricant

Fuser lubricant is a consumable item required by the printer. You should keep at least two boxes on hand for installation by the service representative. The consumption rate of Xerox fuser lubricant is approximately one tube per 120,000 pages. For product information, refer to the consumable supplies table in this appendix.

Developer

Developer is not consumed by the printer but does have an effective life of approximately 300,000 pages per bottle, guaranteed by Xerox. Developer is a required item and must be kept on hand.

Use only the developer specified for use in your 4850/4890/92C printer.

For colored inks, use the color developer specified for each color in the following table:

A-6

System Overview Guide

Page 76
Image 76
Xerox NPS, IPS, 4890, 4850, 92C manual Dry ink, Fuser lubricant, Developer