Xerox NPS, IPS, 4890, 4850, 92C manual Sample tray 2.Stitcher/stacker tray

Printer components and options

Stitcher/stacker

The stitcher/stacker inserts wire-stitches (staples) into documents.

1

2

Figure 3-7. 4850/4890/92C NPS/IPS printer with stitcher/ stacker

1.Sample tray

2.Stitcher/stacker tray

Sample tray Used for sample prints, rejected prints, and transparencies. Holds up to 100 sheets of 20-pound or 80 gsm bond.

Stitcher/stacker Used for output that is stitched (stapled) and/or offset. The tray tray holds up to 2000 sheets of unstitched 20-pound or 80 gsm bond,

or an equally high stack of stitched sets (200 two-sheet sets). A stitched set consists of up to 50 sheets of 20-pound or 80 gsm bond. The wire supply provides up to 32000 staples.

NOTE: Mixed paper sizes are not supported for stitching. If your system has a stitcher/stacker, the printer cycles down when it detects any specification for stitching different-sized papers.

3-10 System Overview Guide