Xerox WC5230 setup guide Procedure for Scan to E-mailSetup

Scan to E-mail Setup

Procedure for Scan to E-mail Setup

1.Press the <Log In/Out> button, then type the login ID “11111” and select [Enter].

2.Press the <Machine Status> button, then select the [Tools] tab.

3.Select [System Settings], then select [Connectivity & Network Setup].

4.Select [Port Settings].

5.On the [Port Settings] screen, scroll to and select [Send E-mail] and then select [Change Settings].

6.On the [Send E-mail] screen, select [Port Status] and select [Change Settings].

7.On the [Send E-mail Port Status] screen, select [Enabled] then select [Save].

8.Select [Close].

9.On the [Port Settings] screen, scroll to and select [Receive E-mail], then select [Change Settings].

10.On the [Receive E-mail] screen, select [Port Status], then [Change Settings].

11.On the [Receive E-mail Port Status] screen, select [Enabled], then [Save] and [Close].

12.On [Port Settings] screen, scroll to and select [E-mail Notification Service], then select [Change Settings].

13.On the [E-mail Notification Service] screen, select [Port Status], then [Change Settings].

14.On the [E-mail Notification Service - Port Status] screen, select [Enabled], then [Save].

15.Select [Close] until the [Tools] tab screen is displayed.

3