Basic Setup, Overview | XiNCOM XC-DPG602 guide

Chapter 2 - Basic Setup

XC-DPG602

Twin WAN DNS → IP Gateway

Chapter Contents

•Overview

•Procedure

1.Conﬁguring your LAN

2.Connecting Broadband Modems

3.Conﬁguring for Internet Access

4.Conﬁguring your LAN PCs

Overview

Basic setup of your XC-DPG602 wil involve the following steps:

1.Connect the XC-DPG602 to one (1) PC and conﬁgure it to your existing LAN.

2.Connecting one or two Broadband Modems to your XC-DPG602.

3.Conﬁguring the XC-DPG602 for Interent Access.

4.Conﬁguring all PCs on your LAN to use the XC-DPG602.

Requirements:

•One or two Broadband modems (T1, xDSL, Cable, and Satillite) with an active account from your ISP(s).

•Two standard 10/100BaseT network (UTP) cables with RJ-45 connectors.

•TCP/IP network protocol must be installed on all PCs.

CAT5 Ethernet Cables

Broadband Modems

TCP/IP Enabled PCs

9

Image 9

XiNCOM XC-DPG602 manual Basic Setup, Overview

Contents

Twin WAN DNS IP Gateway Table of Contents QoS Conﬁguration DNS Conﬁguration Use TWO ISPs for expanded bandwidth and redundancy Introduction Features Password Protected Conﬁguration Easy SetupHttp Firmware Upgrade and backup Dhcp Server Support System Physical Details LED Action Condition Default Settings Overview Basic Setup Configuring the XC-DPG602 for your LAN ProcedureNo Response? Configuring the XC-DPG602 for your LAN Installation Diagram for XC-DPG602 Connecting two broadband modems Settings Primary Setup Connection Mode Configuring for Internet AccessConnection Type Address Info TCP/IP Settings Configure PCs on your LANInternet Access Overview For Linux Clients For Apple ClientsFixed IP Address To act as a Dhcp Client recommended Advanced Port Port Options Health Check Auto Dialup Bridge Mode Load Balance Settings Load Balance Advanced PPPoE Settings Advanced PPPoE Advanced Pptp Settings Advanced Pptp Advanced Setup Host IP Host IP Virtual Servers Virtual Servers Custom Virtual Servers Settings Custom Virtual ServersCustom Virtual Servers Server List Settings Special Applications Special ApplicationsSpecial Application Settings Dynamic DNS To use the Dynamic DNS FeatureDynamic DNS Dynamic DNS For Dynamic IP Multi DMZ & UPnPSelect the desired WAN port Private IP Address Advanced Features Advanced FeaturesSettings Advanced Features HTTP// Internet IP Address of the XC-DPG602 Using Remote Web-based Setup Firewall Exception Security Management Access Filter Block URLBlock URL Session Limit Session Limit & Firewall Exception QoS Conﬁguration Conﬁgure DNS DNS Conﬁguration XC-DPG602 & 603 Gateways How it works Domain Name Configuration Public WAN 1 & 2 IP Address NS Record Primary/Secondary Name ServerMX Record Mail Exchange Preference 1 Record Map Host URLCname Record Host URL List Snmp Simple Network Management Protocol Management AssistantEmail Alert System Information Syslog Management AssistantSyslog Conﬁguration Message Status Upgrade Firmware Admin Password ScreenUsing the Tftp Utility Recommended Updating the Firmware Backup your conﬁguration Uploading the Firmware Http Upgrade FirmwareTo upload the ﬁrmware to the router Restoring Saved Conﬁguration Operation & Status Operation & Status OverviewSystem Status Operation & Status Restore Factory DefaultsWAN Status NAT Status Existing Dhcp Server Advanced LAN Conﬁguration Static Routing Advanced LAN Configuration 192.168.2.0 Conﬁguring other Routers on you LAN255.255.255.0 192.168.1.100 Operating Temperature DimensionsStorage Temperature External Power Adapter Checking TCP/IP Settings Windows 9x/ME TCP/IP SettingsUsing Dhcp Using Specify an IP Address Using a ﬁxed IP Address Use the following IP Address Checking TCP/IP Settings Windows Figure G. Network Conﬁguration Windows XP Checking TCP/IP Settings Windows XP Overview Troubleshooting