3. Use the [DATA/JOG] Wheel to select a desired preset.
4. Cursor to the Recall button and press the [ENTER] key.
5. To adjust the dynamic processor, turn the yellow [DYN] knob. In the
default settings of the AW16G turning the [DYN] knob will adjust all
parameters of the dynamic processor simultaneously. This allows for very
quick and easy adjustment of the processor.
This is for basic dynamic processor adjustments. If you want more control you
use the cursor keys to select the various parameters within the DYN EDIT screen and
then use the DATA/JOG wheel to adjust them.
After applying EQ and dynamics processing to the tracks you may want to
use the internal effects of the AW16G.
The AW16G has two internal effects processors with forty-eight different
presets in each effects processor. Some examples of the presets in these
effects processors would be reverb, delay, chorus, tremolo, and pitch-shift. It is
possible to record the tracks with effects, but typically they are added during the
mixdown process.
Since there are two of these internal effects processors it is not possible to
have a different effect on each track, but you can send as many tracks as desired
to either or both of the effect units.
Recalling a Preset on an Effects Processor
1. Press the [EFF 1] until the EFFECTS LIBRARY
screen is displayed.
2. Use the [DATA/JOG] to select the desired effect preset.
18