Recording Now that everything is set up and connected properly you can begin
recording. The first step in the recording process is to create a new song.
When you start the AW16G for the first time, an empty song will be loaded automatically.
If you use this automatically loaded song, then there is no need to create a new song.
Creating a New Song
1. In the Work Navigate Section press the [SONG]
key until the Song List page is displayed.
2. Move the cursor to the NEW button and press
the [ENTER] key next to the jog wheel.
A popup window will ask you if you want to save the current song.
3. Move the cursor to either YES (if you want to save the current song) or
NO (if you do not want to save the current song) and press the [ENTER]
key.
Another popup window will appear, allowing you to choose any settings that will
carried over from the current song.
6