Components

1.Cord

2.Clip

3.Engine shut-off switch

EMU26001

Engine stop button

To open the ignition circuit and stop the en- gine, push this button.

EMU26030

Choke knob

To supply the engine with the rich fuel mixture required to start, pull out this knob. The choke knob has the 4 operating positions shown in the following illustration.

1.Use to start a hot engine

2.Use to warm up a cold engine or restart a warm engine

3.Use to warm up a cold engine or restart a warm engine

4.Use to start a cold engine

EMU26070

Manual starter handle

To start the engine, first gently pull the handle out until resistance is felt. From that position, then pull the handle straight out quickly to crank the engine.

EMU26122

Steering friction adjuster

A friction device provides adjustable resistance to the steering mechanism, and can be set according to operator preference. An adjusting screw or bolt is located on the swivel bracket.

20