Components

EMU26373

Cowling lock lever(s) (turn type)

To remove the engine top cowling, turn the cowling lock lever(s) and lift off the cowling. When installing the cowling, check to be sure it fits properly in the rubber seal. Then lock the cowling again by returning the cowling lock le- ver(s) to the lock position.

1. Carrying handle

2. Clamp bracket bar

1. Cowling lock lever(s)

EMU26430

Carrying handle

A carrying handle is included on the clamp bracket. After setting the handle up, it enables you to carry the outboard motor easily with one hand.

To set up the carrying handle, proceed as fol- lows:

1.Place the tilt lock lever in the lock posi- tion.

2.Securely hook the arm on the carrying

handle end to the clamp bracket bar.

ECM00080

NOTICE

Place the tilt lock lever in the lock position while using the carrying handle. Other- wise, the lower unit could fall to the ground while carrying the motor.

22