❑Extra Bass

Sets the speakers to produce the front channel low-frequency components.

■Level

Adjusts the volume of each speaker.

Settings

Off (default)

Depending on the size of the front speakers, either the subwoofer or front speakers produce the front channel low-frequency components.

Choices

Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front Presence R, Subwoofer

Setting range

On

Both the front speakers and subwoofer produce the front channel low-frequency components.

-10.0 dB to +10.0 dB (0.5 dB increments)

Default

• This setting is not available when “Subwoofer” is set to “None”, or when “Front” is set to “Small”.

❑Bass Cross Over

Sets the lower limit of the low-frequency components that can be output from a speaker whose size is set to “Small”. A frequency sound lower than the specified value will be produced from the subwoofer or front speakers.

Settings

40 Hz, 60 Hz, 80 Hz (default), 90 Hz, 100 Hz, 110 Hz, 120 Hz, 160 Hz, 200 Hz

•If the volume and crossover frequency are adjustable on your subwoofer, set the volume to half and crossover frequency to maximum.

■Distance

Sets the distance between each speaker and listening position so that sounds from the speakers reach the listening position at the same time. First, select the unit of distance from “Meter” or “Feet”.

Choices

Front L, Front R, Center, Surround L, Surround R, Surround Back L, Surround Back R, Front Presence L, Front Presence R, Subwoofer

Setting range

0.30 m to 24.00 m (1.0 ft to 80.0 ft), *0.05 m (0.2 ft) increments

Default

3.00 m (10.0 ft)

0.0dB

■Parametric EQ

Adjusts the tone with an equalizer.

Settings

Manual

Select this option when you want to adjust the equalizer manually.

For details, see “Manual equalizer adjustment”.

 

 

 

YPAO:Flat

Adjusts individual speakers to achieve the same characteristics.

 

 

YPAO:Front

Adjusts individual speakers to achieve the same characteristics as

the front speakers.

 

 

 

YPAO:Natural

Adjusts all speakers to achieve a natural sound.

 

 

Through

Does not use the equalizer.

 

 

•“YPAO:Flat”, “YPAO:Front”, and “YPAO:Natural” are available only when the measurement results of “Auto Setup” have already been saved (p.40). Press ENTER again to view the measurement results.

■Manual equalizer adjustment

1Set “Parametric EQ” to “Manual” and press ENTER.

2Press ENTER again to enter the edit screen.

3Use the cursor keys to select a speaker and press ENTER.

•To restore the default settings for all speakers, select “PEQ Data Clear” and then “OK”.

•To copy the parametric equalizer values acquired with “Auto Setup” (p.40) to the “Manual” fields for fine adjustment, select “PEQ Data Copy” and then an equalizer type.

CONFIGURATIONS ➤ Configuring various functions (Setup menu)

En 102