HDMI OUT1, HDMI OUT2

Enables/disables the audio output from a TV connected to the HDMI OUT 1 jack or HDMI OUT 2 jack.

Settings

Off (default)

Disables the audio output from the TV.

On

Enables the audio output from the TV.

 

 

• The HDMI OUT 1–2 jacks output 2-channel audio signals when the unit is turned on.

Standby Through

Select whether to output videos/audio (input through HDMI jacks) to the TV when the unit is in standby mode. If this function is set to “On”, you can use the input selection keys (AV 1–7 and V-AUX) to select an HDMI input even when the unit is in standby mode (the standby indicator on the unit blinks).

Settings

Off (default)

Does not output videos/audio to the TV.

Network

Configures the network settings.

IP Address

Configures the network parameters (such as IP address).

DHCP

Select whether to use a DHCP server.

Settings

On

Outputs videos/audio to the TV.

(The unit consumes more power than when “Off” is selected.)

Off

Does not use a DHCP server. Configure the network parameters manually. For details, see “Manual network settings”.

On (default)

Uses a DHCP server to automatically obtain the unit’s network parameters (such as IP address).

• This setting is available only when “HDMI Control” is set to “Off”.

Manual network settings

1Set “DHCP” to “Off”.

2Use the cursor keys (q/w) to select a parameter type and press ENTER.

IP Address

Specifies an IP address.

Subnet Mask

Specifies a subnet mask.

 

 

Default Gateway

Specifies the IP address of the default gateway.

 

 

DNS Server (P)

Specifies the IP address of the primary DNS server.

 

 

DNS Server (S)

Specifies the IP address of the secondary DNS server.

 

 

3Use the cursor keys (e/r) to move the edit position and the cursor keys (q/w) to select a value.

4To confirm the setting, press ENTER.

5To configure another network parameter, repeat steps 2 to 4.

CONFIGURATIONS Configuring various functions (Setup menu)

En 107