Remote control

Problem

Cause

Remedy

 

The unit is out of the operating range.

Use the remote control within the operating range (p.5).

 

 

 

 

The batteries are weak.

Replace with new batteries.

 

 

 

 

The unit’s remote control sensor is exposed to direct sunlight or

Adjust the lighting angle, or reposition the unit.

The unit cannot be controlled using the remote

strong lighting.

 

control.

 

 

The remote control is set to control external devices.

Press RECEIVER to set the remote control to control the unit (the key lights up in

 

 

orange).

 

 

 

 

 

 

The remote control IDs of the unit and the remote control are not

Change the remote control ID of the unit or the remote control (p.116).

 

identical.

 

 

 

 

 

 

The remote control is set to control the unit.

Press SOURCE to set the remote control to control external devices (the key lights

External devices cannot be controlled using the

up in green).

 

 

 

remote control.

The corresponding remote control code is not set properly.

Set the remote control code again (p.119). Even if the remote control code is

 

registered properly, some products may not respond to the remote control.

 

 

 

 

 

 

The batteries of the remote control of the unit and/or the external

Replace with new batteries.

 

device are weak.

 

 

 

 

 

The remote control does not learn new functions.

The distance between the two remote controls is not appropriate.

Place the remote controls at a proper distance (p.121).

 

 

The signal coding or modulation of the other remote control is not

 

(China, Korea, U.K. and Europe models only)

Learning is impossible in this case.

compatible with the remote control.

 

 

 

 

 

 

Memory capacity is full.

Clear unnecessary assignments to free some memory space for new functions

 

(p.122).

 

 

 

 

 

APPENDIX Troubleshooting

En 131