| SOURCE | RECEIVER |
|
| |
|
|
|
|
| SOURCE z |
|
| AV |
|
| SOURCE |
1 | 2 |
| 3 | 4 |
|
5 | 6 |
| 7 |
| |
| AUDIO |
|
| ||
1 | 2 |
| 3 | 4 |
|
PHONO | MULTI |
| USB | NET |
|
TUNER |
|
|
|
|
|
MAIN ZONE 2 |
|
| PARTY | HDMI OUT |
|
| SCENE |
|
| ||
1 | 2 |
| 3 | 4 |
|
BD/DVD | TV |
| NET | RADIO |
|
PROGRAM | MUTE | VOLUME |
| ||
TOP MENU |
| External device | |||
ON |
|
|
| OPTION | operation keys |
SCREEN |
|
|
|
| |
| ENTER |
|
| Menu operation keys | |
RETURN |
|
|
| DISPLAY |
|
|
|
|
| BAND |
|
MODE |
|
|
|
| External device |
TUNING |
| PRESET | |||
|
| SUR. DECODE | STRAIGHT | operation keys | |
|
|
| |||
MOVIE | MUSIC |
|
|
| |
|
| ENHANCER | PURE DIRECT |
| |
INFO | SLEEP |
|
|
|
|
1 | 2 |
| 3 | 4 |
|
56 
7 
8
|
| MEMORY |
|
9 | 0 | 10 ENT |
|
|
| TV | TV operation keys |
INPUT |
|
| |
| TV VOL | TV CH | TV z |
MUTE |
| CODE SET |
|
CODE SET
(China, Korea, U.K. and Europe models only)
The remote control of the unit can receive remote control signals from other infrared remote controls and learn the remote control operation. If you cannot find a remote control code for your playback device or if any key on the remote control does not work after you register the remote control code, use the learning function to assign a function to each key.
1Press CODE SET.
SOURCE blinks twice.
Perform each of the following steps within 1 minute. Otherwise, the setting will be canceled. If this happens, repeat from Step 1.
2Press one of the following keys depending on the type of your device.
For playback device: press the input selection key (corresponding to the input jacks where the device is connected).
For TV: press TV z.
3Use the numeric keys to enter “9990”.
4Aim the infrared transmitters of the remote controls at each other.
Remote control of external device
VOLUME MUTE PROGRAM | RADIO NET TV BD/DVD | 4 3 2 1 | SCENE | OUT HDMI PARTY 2 ZONE MAIN | TUNER | NET USB MULTI PHONO | 4 3 2 1 | AUDIO | 4 3 2 1 | AV | RECEIVER SOURCE |
5 to 10 cm (2 to 4”) apart
5Perform the following steps within 10 seconds.
a On the unit, press one of the following keys to which you want to assign a function.
For playback device: SOURCE z, menu operations keys, external device operation keys
For TV: TV operation keys
bOn the external device, press the key from which the operation is learned.
Once the operation is learned successfully, SOURCE blinks twice.
If it blinks six times, learning has failed. Repeat Step 5.
6Repeat step 5 until all desired operations are learned.
7Press CODE SET.
SOURCE blinks once.
Note
•If you press RECEIVER in step 2, you can assign functions of an external receiver to the menu operation keys, external device operation keys or numeric keys. However, it makes these keys to control the unit impossible. If you need to restore the remote control code for the unit, perform the following steps.
a Press CODE SET. b Press RECEIVER.
c Use the numeric keys to enter “9992”.
CONFIGURATIONS ➤ Controlling external devices with the remote control | En 121 |
|
|