CONNECTIONS
Connecting the antennas
Both AM and FM indoor antennas are included with this system. In general, these antennas should provide sufficient signal strength.
Connect each antenna correctly to the designated terminals.
■Connecting indoor FM antenna
Connect the included indoor FM antenna to the FM ANT terminal.
■Connecting the AM loop antenna
1 Set up the AM loop antenna, then connect it.
Indoor FM antenna | AM loop antenna | ||||||
(included) | (included) | ||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
75Ω UNBAL.
(U.S.A. model)
FM ANT | GND AM ANT |
OPTICAL | O |
DVD/CDV
DIGITAL AUDIO IN
Ground (GND terminal)
In some cases, you can reduce interference by connecting the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth.
2 Press and hold the tab to insert the AM loop
antenna lead wires into the AM ANT and GND terminals.
Bare wire
Tab
3 Release the tab. (The tab will return to its original position when you release your finger.)
Once connected, pull the wires gently to check that they are connected securely.
4 Orient the AM loop antenna for the best reception.
y
•A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. Consult the nearest authorized YAMAHA dealer or service center about the outdoor antennas.
Notes
•The AM loop antenna should be placed away from this system.
•The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this system.
14
