Common procedures, Press SET UP to show the menus

3, 4, 2, 1

ENTER

RETURN

Numbered buttons

SET UP

CANCEL

Common procedures

Remote control only

See page 16 for menu and option details.

≥The QUICK SETUP screen appears when you press [SET UP] the first time after purchase (➡ page 6).

The screen changes to display the menu.

3 Press [3, 4] to select the item you want to change and press [ENTER].

4 Press [3, 4, 2, 1] to select the option and press [ENTER].

The screen now shows the menu again.

To return to the previous screen

Press [RETURN].

When you are finished

Press [SET UP].

Entering a password (Ratings)

[DVD-V]

The password screen is shown when you select levels 0 to 7.

1.Input a 4-digit password with the numbered buttons and press [ENTER].

≥If you enter a wrong number, press [CANCEL] to erase it before you press [ENTER].

≥The lock symbol appears closed to show the rating is locked.

≥Do not forget your password.

2.Press [ENTER] to confirm the 4 digits.

Now, when you insert a DVD-Video that exceeds the ratings limit you set, a message appears on the television.

Follow the on-screen instructions.

	[DVD-V]
	Change the settings when you have connected equipment through this

	unit’s DIGITAL AUDIO OUT terminal (OPTICAL).
			operations
	PCM Down Conversion

	Select how to output audio with a sampling frequency of 96 kHz.
	Select “Yes” if the equipment you connect cannot process signals with a
	sampling frequency of 96 kHz.		Advanced
	≥Select “No” if you use analogue connection, irrespective of the type of

	equipment.
	No (Factory preset):
	Output as 96 kHz. There is no output if the disc has copy protection. Select
	“Yes” in this case.
	Yes:
	Converted to 48 kHz for output.

	Dolby Digital and DTS Digital Surround
	Bitstream: (Factory preset for Dolby Digital and DTS Digital Surround)
	Select if the equipment you connected can decode the signal.
	PCM:
	Select if the equipment you connected cannot decode the signal.
	Off:
	Select if the equipment you connected cannot decode the signal.
	IMPORTANT
	If the equipment you connected cannot decode the signal, the
	setting must be changed to PCM or Off. If not, signals the equipment
	cannot process will be output by this unit, causing high levels of
	noise which can damage your hearing and the speakers.

RQT6573