Yamaha HOMETHEATER SOUND SYSTEM Basic Playback, VIDEO 1 AUTO, Basic operations, To mute the sound

BASIC PLAYBACK

Basic operations

You can play the software loaded on the audio and video components connected to this system.

5 Adjust the volume to the desired level.

The volume level is displayed digitally.

Example:	–70 dB
Control range:	VOLUME MUTE (minimum) to
	0 dB (maximum)

SLEEP

POWER		POWER
TV	AV	SLEEP
	TV MODE
	INPUT	TUNER
CH		VOL
	MUTE	VCR
SUBTITLE		AUDIO
REC		VIDEO 2
		VIDEO 1
		CD
		DVD

POWER ( )

Input selector buttons

Note

•If you have connected a recording component to the VCR OUT jacks, and you notice distortion or low volume during playback of other components, try turning the recording component on.

■Enhancing the bass tones

First press AMP, then press B. BOOST.

USING BASIC

DSP program buttons

B.BOOST

	CODE SET		AMP
HALL	JAZZ	ROCK	ENTERTAINMENT
1	2	3	4
SPORTS	MONO MOVIE	MOVIE 1	MOVIE 2

5 6 7 8

/DTS	SELECT	MATRIX 6.1	STEREO
9	0	10	CANCEL

TOP MENU		MENU		MUTE
	PRESET
LEVEL SET MENU			MUTE
			ABCDE
CH	ENTER	CH		VOL + / –
	PRESET
TEST		B.BOOST	VOL
ON SCREEN		RETURN

•“Bass Boost ON” appears in the display.

•This function enhances the bass tones of the subwoofer by increasing the level of the low-range frequencies.

•To cancel B. BOOST mode, press B. BOOST again.

y

FUNCTIONS

(U.S.A. model)

Indication on the front panel display (example):

SP VIDEO 1

VIDEO 1 AUTO

Selected input source Input mode

1 Press POWER () to turn on the power.

2 Turn on the AV component connected to this system.

3 Press INPUT on the front panel repeatedly (one of the input selector buttons on the remote control) to select the input source.

The selected input source name and input mode appear on the front panel display for a few seconds.

4 Start playback or select a broadcast station on the source component.

Refer to the operation instructions for the component.

•The B. BOOST mode does not function when the headphones are connected.

Note

•If a thudding noise is heard from the subwoofer when this function is turned on, lower the subwoofer level. Otherwise, the subwoofer may be damaged due to an excessive input level of low-bass signal.

■To mute the sound

Press MUTE on the remote control.

To resume the audio output, press MUTE again.

y

•You can also cancel mute by pressing VOL +/–, etc.

•During muting, the “MUTE” indicator flashes on the front panel display.

English

19