Front and Rear of Unit

Rear Panel

The CRW6416SX drive’s rear panel features the following:

Serial number

This consists of 3 letters and 7 digits. You may need to refer to this number when requesting User Support services.

CDR ID selector switch

The drive’s SCSI ID number is shown in the switch’s window. Press the button above the window to decrement the SCSI ID number, or the button below the window to increment it. (P.10)

SCSI-1

SCSI-1 & SCSI-2 connectors Connect either of these to your computer’s SCSI adapter card using the SCSI cable. The other connector can be used as a pass-through when daisy-chaining more SCSI devices to it. It can be left vacant if your drive is the last device on the SCSI chain and is terminated. (P.18)

SER. NO.

st2

SCSI-2

 

AC IN

CDR ID

LINE OUT

R

L

 

1

TERMINATOR

 

 

 

 

OFF ON

 

Power connector Connect the included power cable here. (P.18)

TERMINATOR switch This enables the drive’s built-in SCSI termination. Switch this to “ON” if your drive is the last device on the SCSI chain. Otherwise, switch it to “OFF.” (P.11)

LINE OUT connectors To listen to audio CDs with your drive, connect these to the line-level input (LINE IN) of your stereo equipment using a standard stereo phono cable (sold separately).

9