Yamaha CRW6416SX 2Termination

Installation

2Termination

Terminators prevent SCSI signals from being reflected off the last device in the chain. The SCSI terminator switch should be set to “ON” if your CRW6416SX drive is the last device on the SCSI chain. If it is not the last device on the chain, the TERMINATOR switch should be set to “OFF.”

Computer

Hard disk drive (unterminated)

CRW6416SX

SCSI adapter card

Terminator ON

nBy factory default, the Terminator switch is set to “ON.”

Contents

Page Page English SAFETY PRECAUTIONS PLEASE READ CAREFULLY BEFORE PROCEEDING WARNING CAUTION ■About CD-R/RWdiscs 2.All trademarks contained in this manual belong to their respective owners Reproduction of this manual, either in part or in full, is expressly forbidden ■Precautions for Transportation ■Distributing Discs Table of Contents Setup Flowchart Windows Users Macintosh Users Introduction Features of the CRW6416SX Drive 6X Speed Writing to CD-R,4X Speed Writing to CD-RWand 16X Speed Reading Supports a Wide Range of CD Formats SCSI-2(Fast SCSI) Compatible System Configuration Computer Software Media Tool Phillips Screwdriver Front and Rear of Unit Front Panel Rear Panel Installation First Steps 1SCSI ID number 2Termination Setting Up The CRW6416SX Drive Installing a SCSI Adapter Card Page Page Connecting the Drive Page Page Page Verifying the Hardware Installation Windows Users Macintosh Users Operation Loading a Disc Ejecting the Disc Manually Ejecting a Disc Troubleshooting The disc tray does not come out The disc keeps being ejected The drive does not operate correctly The “Buffer Underrun” error message is displayed Appendix Writing Modes Session-at-Once(SAO) Packet Writing About the Firmware Determining the firmware version of the CRW6416SX drive (in Windows 95/98) LED Indicator Messages CRW6416SX Specifications Page Index JAPAN U.S.A CANADA UNITED KINGDOM, BENELUX, GREECE, CYPRUS, TURKEY and EGYPT