Operation

This section explains how to operate the CRW6416SX drive after you have installed it.

Loading a Disc

1

2

1Press the Eject button on the CRW6416SX drive’s front panel.

2Place the disc onto the tray with its label or printing facing upward.

3Press the Eject button to close the tray.

nWhen a disc is loaded, the ON/DISC LED is lit up in orange first, then changes to green. For more details, refer to page 30.

nDo not push or pull the tray using excessive force. Doing so can damage the drive or the disc. Instead, always use the Eject button to open or close the tray.

Ejecting the Disc

1

2

1Press the Eject button on the CRW6416SX drive’s front panel.

2Remove the disc from the tray.

3Press the Eject button to close the tray.

nThe disc tray will not open if the computer is not switched on. Also, depending on the SCSI adapter card settings, it may not open if the drive is busy reading a disc.

nOnly remove the disc after the disc tray has opened fully. Otherwise, you risk damaging the drive or the disc.

22