Setting Up The CRW6416SX Drive

There are three stages to setting up your CRW6416SX drive.

●Installing a SCSI adapter card

You will need to open the casing of your computer and insert a SCSI adapter card (sold separately) if one has not been installed already.

nYou will need a Phillips screwdriver to open the casing of the computer and to secure the SCSI adapter card in its slot.

●Connecting the drive

You will need to connect your CRW6416SX drive to your computer’s SCSI adapter card using a SCSI cable. You will also need to connect the included power cable between the drive and an electrical outlet.

●Verifying the Hardware Installation

Before you can begin using your CRW6416SX drive, you need to verify that it has been installed and recognized correctly.

12