Setup Flowchart

Macintosh Users

STEP Does your Macintosh have 1 a built-in SCSI connector?

YES

STEP Set up the CRW6416SX drive

2

1.

Set the switches at the rear of the drive.

 

(P.10, 11)

 

2.

Connect the SCSI and power cables,

 

 

then switch the drive on. (P.16-18)

STEP Install the CD writing 3 software

For details about how to install the software, refer to the documentation that came with it.

STEP Check that the CRW6416SX 4 drive is recognized correctly

Start up the CD writing software and check that the drive is recognized correctly.

STEP Start using the CRW6416SX 5 drive!

Use the drive to create audio CDs, to back up data on your hard disk, or for whatever purpose suits your needs.

STEP 1-1

NO

STEP 1-2

Obtain a SCSI adapter card

Recommended model:

Adaptec PowerDomain 2930U (PCI)

Install the SCSI adapter card

Read this manual and insert the SCSI card into the appropriate PCI slot on the computer.

2