Troubleshooting
Please also refer to the YAMAHA
●Is the drive’s power cable attached correctly?
The computer does not start up.●Is the SCSI card installed correctly? Please read the documentation that came with your SCSI card for details.
The CRW6416SX drive is not recognized.●Is the drive’s power cable attached correctly, and does the drive power up? Also, is the SCSI cable connected correctly?
If the system has started up normally, you will be able to see the CRW6416SX drive and SCSI card listed in Control Panel System Device Manager tab. The drive will be listed as “Yamaha CRW6416S” when you
When you power up your computer, you can access the machine’s hardware SCSI BIOS settings before Windows is loaded. You can set your computer to recognize the SCSI card and CRW6416SX drive in the BIOS.
nGenerally, the BIOS (Basic Input / Output System) is a small program that resides on a ROM chip on the computer’s motherboard as well as on some expansion cards. It checks the system and its devices (such as serial ports and hard disk controllers) before loading the operating system (OS).
●Are you using the correct SCSI driver?
If the SCSI card has not been installed correctly under Windows 95/98, make sure that you have installed the most recent drivers supplied by the SCSI card manufacturer.
If the SCSI card has not been installed correctly under Windows NT, update to the most recent ASPI drivers supplied by the manufacturer of the SCSI card or the
For information about the latest version of any driver, please contact the respective hardware/software manufacturers.
●Is the SCSI adapter card recognized correctly by the operating system (OS)?
The drivers for your SCSI adapter card may be incorrect. For more details, contact the manufacturer of your SCSI adapter card.
●Is the drive’s SCSI ID number the same as that of another device on the SCSI chain? (→P. 10)
●Are the pins and holes on the SCSI connectors straight and not deformed? Check the connectors.
24