DDK-7 Owner’s Manual 103
Music Data Recorder (MDR)
7
Press the [MDR] button in the panel to call up the M.D.R. display. All operations related
to the M.D.R., such as recording and playing your performances, can be done in the
M.D.R. display.
The M.D.R. display consists of two display pages: the SONG SELECT Page and the
TOOLS Page. In the SONG SELECT Page, you can select the song that you want to
playback, or to which you want to record your performance, then playback or record. The
TOOLS Page has a variety of song utility operations, such as copy, delete, rename, etc.
Pressing any button other than the [MDR] button while the M.D.R. display is open exits
from the M.D.R. display. If you exit from the function inadvertently, simply press the
[MDR] button again to recall the M.D.R. display.
All the instructions in this chapter are related to the M.D.R. display. To call up the M.D.R.
functions and the M.D.R. display, press the [MDR] button.
If you find that you are unable to use new, blank external media (such as USB flash
memory, floppy disks or USB storage devices) or old ones that have been used with
other devices, you may need to format them.
Formatting erases all the data in the media and makes it ready to record. The data
erased by formatting will be lost permanently. Check whether or not the media
contains any important data you wish to keep before executing the operation.
Connect the device to the USB TO DEVICE terminal.
Press the [TOOLS] button at the top right of the display to call up
the TOOLS Page.
1Calling Up the M.D.R. Display
2Formatting External Media
1
2