4
Voice Controls and Effects
DDK-7 Owner’s Manual
56
DISTORTION+

A combination of Distortion and Delay.

WAH

This uses an automatic up/down filter sweep to

change the timbre of the sound, producing a

“wahwah” sound.

Effect Type Effect Type
DIST+DELAY V_DIST H+DLY
ODRV+DELAY V_DIST S+DLY
XG DIST+DLY DIST+T DLY
XG ODRV+DLY ODRV+T DLY
CMP+DIST+DLY CMP+DST+TDLY
CMP+ODRV+DLY CMP+OD+TDLY
XG CMP+DT+DL V_DST H+TDLY
XG CMP+OD+DL V_DST S+TDLY
Parameter Value Description
Dist. Drive 0 - 127 Determines the depth of
distortion. The higher the
value the greater the amount
of distortion.
Dist. Out Level 0 - 127 Determines the output level
of the distorted sound.
L DelayTime 0.1 - 1486.0 msec Determines the time that
elapses between the original
sound and the delayed
repeat in the left channel.
R DelayTime 0.1 - 1486.0 msec Determines the time that
elapses between the original
sound and the delayed
repeat in the right channel.
Delay
Feedback
-63 - +63 Determines the amount of
delayed repeats in the
sound.
Comp.
Threshold
-48 - -6db Determines the input level at
which compression begins to
be applied.
DelayTime 0.1 - 1486.0 msec Determines the time that
elapses between the original
sound and the delayed
repeat.
Overdrive 0 - 100 % Determines the depth of
overdrive. The higher the
value the greater the amount
of distortion.
Device Transistor, Vintage,
Dist 1, Dist 2, Fuzz
Determines the device that
will create distortion:
Transistor, VintageTube,
Distortion, Fuzz and so on.
Speaker Flat, Stack, Combo,
Twin, Radio,
Megaphone
Determines the simulated
speaker type: Flat, Stack,
Combo, Twin, Radio,
Megaphone and so on.
Presence 0 - 20 Values in the higher range
can give vocals more
presence.
Dry/Wet D63>W - D<W63 Determines the balance of
original sound and the effect
sound.
Effect Type Effect Type
AUTO WAH TC WAH+ODRV
XG AUTO WAH XG TC WAH+OD
TOUCH WAH 1 CLAVI TC WAH
TOUCH WAH 2 EP TOUCH WAH
AT WAH+DIST WAH+DST+TDLY
XG AT WH+DST WAH+OD+T DLY
AT WAH+ODRV WAH+DIST+DLY
XG AT WAH+OD XG WH+DST+DL
TC WAH+DIST WAH+ODRV+DLY
XG TC WH+DST XG WH+OD+DLY
Parameter Value Description
LFO Freq. 0.00 - 39.7 Hz Determines the speed of the
Wah effect.
LFO Depth 0 - 127 Determines the depth of the
Wah effect.
Cutoff 0 - 127 Determines the central
frequency that the wah filter
acts upon.
Resonance 1.0 - 12.0 Determines the frequency
bandwidth (around the
central frequency set in
Cutoff above) that the wah
filter affects.
Drive 0 - 127 Higher values result in a more
distorted sound.
Sensitivity 0 - 127 Determines the degree to
which the wah filter is
affected by your playing
touch.
DelayTime 0.1 - 1486.0 msec Determines the time that
elapses between the original
sound and the delayed
repeat.
Delay
Feedback
-63 - +63 Determines the amount of
delayed repeats in the
sound.
Comp.
Threshold
-48 - -6db Determines the input level at
which compression begins to
be applied.
Dist. Out Level 0 - 127 Determines the output level
of the distorted sound.
Dry/Wet D63>W - D<W63 Determines the balance of
the original sound and the
effect sound.