8
Voice Edit
DDK-7 Owner’s Manual
144
1 LFO WAVE
Determines the LFO waveform used to vary the sound. For details, see page 145.
2 LFO SPEED
Determines the speed of the LFO waveform. Higher values make the speed faster.
Range: 2 – 93
3 LFO PMD (Pitch Modulation Depth)
Determines the amount by which the LFO waveform varies the pitch of the sound.
Higher values result in a greater amount of pitch change. For the minimum setting, the
pitch does not change.
Range: 0 – 400
4 LFO FMD (Frequency Modulation Depth)
Determines the amount by which the LFO waveform varies the filter cutoff frequency.
Higher values result in a greater amount of frequency change. For the minimum
setting, the frequency does not change.
Range: 0 – 4800 cent
5 LFO AMD (Amplitude Modulation Depth)
Determines the amount by which the LFO waveform varies the amplitude of the
sound. Higher values result in a greater amount of amplitude change. For the
minimum setting, the amplitude does not change.
Range: 0 – 128
When playing a User Voice you have created using the LFO parameters (above), set the
Vibrato setting in the Voice Condition display to “Preset,” not “User.” If Vibrato is set
to “User” and the Vibrato parameters (depth and/or speed) are set fairly high, you may
not be able to hear the effect of the LFO.
LAYER Page 3
3 4 51 2
Reference Page
Vibrato (page 43)