DDK-7 Owner’s Manual
136
Music Data Recorder (MDR)
7
Confirm that the desired song to be converted is shown in upper
half of the display.
If you want to change the song, press the [CHANGE] button of the Change
From section to call up the Song Select display and select the desired song.
Press the [CHANGE] button of the Change To section in the
display, then select the destination.
The specified destination location must be within the range of Song 1 - 100 in
the USB flash memory. If a destination is not selected, an empty song is
automatically set as the destination.
Press the [EXECUTE] button in the display to start conversion.
A message appears, prompting confirmation of the operation. Select
[CONVERT] to convert from EL format, or [CANCEL] to abort the operation.
If the remaining memory of the USB flash memory is insufficient, conversion
cannot be executed. (An error message appears and the operation is cancelled.)
Checking the Remaining Memory/media ID
In the TOOLS Page, press the [REMAINING MEMORY] button. This allows you to
check the remaining memory in the media, the song data capacity of the currently
selected song, and whether or not the media has an ID.
3
4
5