Yamaha DDK-7 - page 187

DDK-7 Owner’s Manual 187
9
Rhythm Program
1 POSITION
These are cursor controls for moving the cursor (colored orange) along the rhythm row
in the display.
Moves the cursor to the first position.
Moves the cursor one step to the left.
Moves the cursor one step to the right.
Moves the cursor five steps to the right.
2 DATA
These are data controls for entering rhythms and deleting existing rhythms in the
rhythm row.
SET
For initially entering a rhythm to an empty position in the rhythm row, or for
replacing a pattern at the cursor position. Pressing the [SET] button enters the
rhythm selected from the rhythm menu to the cursor position.
This operation is not available between measures of an ending pattern.
INSERT
For inserting a rhythm before the current cursor position. The new rhythm is
entered just before the cursor position and all other rhythms to the right of the
cursor are moved to accommodate the new number. This operation is not
available between measures of an ending pattern.
Additional rhythms cannot be entered beyond the Rhythm sequence function’s
capacity of 140. If the Insert operation results in the rhythm number going over
the capacity, a “Data Full” message appears and the operation cannot be
executed.
DELETE
For deleting a rhythm at the current cursor position. When the ending pattern is
selected, pressing the [DELETE] button deletes the entire ending pattern (more
than one bar).
CLEAR
For erasing all patterns entered to the selected sequence.
After selecting [CLEAR], a message appears prompting confirmation of the
operation.
Select [CLEAR] to clear the currently selected rhythm sequence, or select
[CANCEL] to abort the operation and return to the previous display.
12
When you insert an ending
pattern into the editing
sequence, any existing
rhythm data that follows an
Ending pattern is
automatically deleted.