DDK-7 Owner’s Manual
228
Connections
13
Selecting Outputs for Each Part
You can assign each individual part of the DDK-7's sounds such as Voice, Percussion,
to be output from specific AUX OUT jacks: MAIN and/or SUB.
Press the [UTILITY] button to call up the GLOBAL Page of the
Utility display.
Press the [AUX OUT] button in the upper right of the display to
call up the AUX OUT Page.
You can assign individual parts to the AUX OUT MAIN and/or SUB jacks: each Voice
section, Organ Flute Voice, Main drum, Add drum, Accompaniment, Keyboard
Percussion, XG and microphone to the AUX OUT MAIN and/or SUB jacks.
Turn the desired output on for each part.
You can select these from MAIN, SUB1, SUB2 and SUB1&2.
If you select a setting other than MAIN, no sound will be heard from the headphones
and monitor speakers because the parts assigned to SUB1, SUB2 and SUB1&2 will
not be output through the PHONES and OUTPUT jacks.
Any parts assigned to the AUX OUT MAIN or SUB1&2 will be output in stereo (1:
left, 2: right). Any parts assigned to AUX OUT SUB1 or SUB2 will be output in
mono.
1
2
3
NOTE
The settings in the Utility
display are automatically
saved when another display
is called up.
NOTE
Chorus and variation effects
of the Rhythm, and Reverb
are not applied to the sound
output through SUB1, SUB2
and SUB1&2.