Yamaha DDK-7 Using the VOLUME buttons on the panel (coarse), Using VOLUME slider in the display (ne)

Voices
2
DDK-7 Owner’s Manual
28
Using the VOLUME buttons on the panel (coarse)
Press one of the VOLUME buttons of each Voice section on the panel to set the desired
level for each Voice.
The buttons have seven volume settings, from a minimum of 0, or no sound, to a
maximum of full volume.
Using VOLUME slider in the display (fine)
Pressing the same Voice button on the panel again (or pressing the Voice name of the
selected Voice in the display) calls up the Voice Condition Display.
To set the volume, touch the VOLUME slider in the display or use the Data Control
Dial. The control range is from 0 (no sound) to 24 (full volume).
DATA CONTROL
Volume slider
NOTE
Depending on the volume
value (set by the slider), two
adjacent VOLUME lamps
may be lit at the same time,
indicating an intermediate
position.