DDK-7 Owner’s Manual
192
9
Rhythm Program
To start a sequence using the Left Footswitch:
You can start or stop the Rhythm Sequence playback using the left footswitch.
To use the left footswitch, pedal unit must be connected to the DDK-7.
Press the desired Sequence buttons, making sure that all their
LEDs are lit.
Press the [FOOT SWITCH] button on the panel to call up the
Footswitch display, LEFT Page.
Set the control mode of the Footswitch to RHYTHM STOP.
(See page 193 for information about the Footswitch settings.)
Press the Left Footswitch with your right foot to turn the
sequence on.
Pressing the Left Footswitch again in the middle of the sequence playback
cancels the Rhythm Sequence.
When you are playing a Rhythm Sequence that is made up of several sequences
(SEQ. buttons), pressing the Left footswitch turns off the currently playing
Rhythm Sequence, and pressing it again starts the next sequence.
You can also start the Rhythm Sequence playback using the optional foot pedal.
You can save your own rhythm patterns (created in the Rhythm Pattern Program) and
Rhythm Sequence (created in the Rhythm Sequence Program) to external media, such
as USB flash memory. Refer to the section “Saving Registrations as Registration Data
(File)” on page 116 for instructions.
When loading your original Rhythm data from external media back to the DDK-7, be
sure to stop the rhythm if it is playing. Loading cannot be executed when a rhythm is
running.
Reference Page
Connecting a pedal unit
(page 229)
Footswitches (page 193)
1
2
3
4
Reference Page
Connecting a foot pedal
(page 229)
Foot pedal (page 196)
4Saving Rhythm Pattern and Rhythm