8Front Level +/– Keys

Increase (+) or decrease (–) the volume level of the front effect speakers.

9Center Level +/– Keys

Increase (+) or decrease (–) the volume level of the center speaker(s).

0Rear Level +/– Keys

Increase (+) or decrease (–) the volume level of the rear effect speakers.

AReset Button

Press this button to “reset” the internal microcomputer which controls remote control operations. Microcomputer “reset” is necessary when the remote control freezes.

*Pressing the RESET button will not erase learned functions.

BOn Screen Display Key

Changes the type of display showing the program name and parameters, or information about various settings and adjustments on the connected monitor’s screen.

Whenever pressed, the screen changes to a full display, a simple display and no display in turn.

CClear Button

Used in USER or LEARN mode to erase a learned function. (See page 39.)

DEffect On/Off Key

Cuts off the sound’s output from the front, rear effect and center speakers. To restore the output from those speakers, press this key again.

EParameter Select Keys

Select DSP program parameters, or titles of the items in the SET MENU mode.

FMuting Key

Mutes the master volume level by 20 dB. While muting, the indicator on the master VOLUME control flashes on and off continuously.

GParameter +/– Keys

Edit DSP program parameters or used for settings and adjustments in the SET MENU mode.

HMaster Volume +/– Keys

Increase (+) or decrease (–) the master volume level.

IParameter/Set Menu Switch

When set to the PARAMETER position, the Parameter Select Keys and Parameter +/– Keys will select and edit DSP program parameters. When set to the SET MENU position, the Parameter Select Keys and Parameter +/– Keys are used for settings and adjustments in the SET MENU mode.

JProgram Select Keys (1 through 12) Select DSP programs 1 through 12.

KTuner Function Keys

Operate Yamaha tuner functions.

LTape Deck Function Keys

Operate Yamaha tape deck functions.

M1/2 Switch

When the YPC/USER/LEARN Switch is set to YPC, this switches the CD/LD Function Keys to keys for use with either the CD player or LD player. (“1” for the CD player and “2” for the LD player.) When the YPC/USER/LEARN Switch is set to USER or LEARN, this switch selects the group 1 or 2 of the learnable function keys. (See page 38.)

English

23