To record a source other than the input source

This unit has a function of selecting a source to be recorded to tape deck or VCRs independent of the selection of input source.

...

1. Press the REC OUT switch (so that “REC OUT” appears on the display and the monitor screen).

Front panel

2.Within 5 seconds, select the source to be recorded with an input selector switch. (The indicator corresponding to the selected source to be recorded will flash.)

Front panel

INPUT SELECTOR

 

 

VCR I

CD

LD

 

 

 

 

 

 

 

 

 

 

 

 

TV/DBS

PHONO

REC OUT CD

3. Press the REC OUT switch (so that the indicator corresponding to the selected source to be recorded stops flashing).

* The same result will be obtained after 5 seconds without any

4.Play the source and confirm it by selecting it with an input selector switch and increasing the setting of the master VOLUME control.

Front panel

INPUT SELECTOR

 

 

VCR I

CD

LD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

TV/DBS

PHONO

5.Set the tape deck or VCR used forrecording to the recording mode.

*Adjust the recording level on the tape deck or VCR.

6.While recording a source, you can enjoy listening to and/or watching another source selected with the input selector switch.

Front panel

Remote control

INPUT SELECTOR

 

VCR I CD

LD

 

TUNER

or

TV/DBS

PHONO

While recording, you can monitor the audio and/or video signals to be recorded by selecting the tape deck or VCR used for recording with the input selector switch.

30

operation.