INPUT LEVEL ADJUSTMENT

This adjustment is important for obtaining the best performance from the internal circuits of this unit. The optimum input level of this unit is pre-adjusted on the basis of the CD source level. This adjustment should be performed on all input sources in your system respectively, so that their levels match the CD source level as closely as possible.

1. Select the CD source.

Front panel

Remote control

INPUT SELECTOR

 

VCR I CD

LD

 

CD

or

TV/DBS

PHONO

4.Select any other source in your system (VCR, tuner, etc.) and play that source.

Front panel

Remote control

INPUT SELECTOR

 

VCR I CD

LD

TUNER

or

TV/DBS

PHONO

5.Adjust the level of the source to be approximately equal to your CD player’s “reference” level by using the INPUT TRIM control.

Front panel

English

2.Play the source.

3.Increase the setting of the master VOLUME control to a convenient listening level (you will use this as your “reference” level).

Front panel

Remote control

or

*This adjustment can also be done with the remote control unit. For using the remote control unit, refer to “5. Input level adjustment (INPUT LVL TRIM)” on page 27.

6. In the same way, adjust levels of other sources.

NOTE: The adjustments will be saved until it is readjusted.

25