OTHER IMPORTANT SETTINGS AND ADJUSTMENTS IN THE “SET MENU” MODE
Make the following five types of settings and adjustments before enjoying audio and video sources. Note that these settings and adjustments cannot be done without monitoring the display information (or the information displayed on the monitor screen).
1.CENTER MODE
2.CENTER GEQ
3.PARAMETER INIT
4.MEMORY GUARD
5.INPUT LVL TRIM
METHOD OF SETTING AND ADJUSTMENT
As described on page 6, you can make these settings and adjustments watching the information displayed on the monitor screen (or superimposed over the video image). So, first turn the monitor on.
1.Set the PARAMETER/SET MENU switch to the SET MENU position on the remote control unit.
Remote control
PARAMETER
SET MENU
2. Select the item (title) on which you will make a change.
Remote control
3. Select any desired position or edit parameters on the item.
Remote control
In the same way, make a setting or adjustment on any other item.
DESCRIPTIONS OF THE ITEMS
1.Selecting Center Mode (CENTER MODE NRML/WD/
PHNTM)
In Normal (NRML) position, any frequency below 100 Hz will be divided between the main left and main right speakers. For this reason even a speaker smaller than the main left and right speakers can obtain a sufficient effect.
In Wide (WD) position, all range of frequencies for the center- channel are output to the center speaker. Select this position if a high quality center speaker is being used.
If not using the center speaker(s), be sure to select Phantom (PHNTM) position, and the audio signals for the center channel are output to the main speakers.
26