2-2. RECORDING A SOURCE TO AUDIO/VIDEO TAPE (OR DUBBING FROM A TAPE TO ANOTHER)

English

To record the input source

...

1. Press the REC OUT switch (so that “REC OUT” appears on the display and the monitor screen).

Front panel

3.Press the REC OUT switch (so that “REC OUT SOURCE” disappears from the display).

*The same result will be obtained after 5 seconds without any operation.

4.Select an input source to be played (and to be recorded). (See page 28 for the method of input source selection.)

Front panel

 

Remote Control

INPUT SELECTOR

 

 

VCR I CD

LD

 

 

 

 

 

 

CD

 

 

 

 

 

 

 

2.Within 5 seconds, select the “SOURCE” position with the input selector switch (so that “REC OUT SOURCE” appears on the display panel and the monitor screen).

Front panel

INPUT SELECTOR

 

 

VCR I

CD

LD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

REC OUT SOURCE

or

TV/DBS

PHONO

5.Play the source.

6.Set the tape deck or VCR used for recording to the recording mode.

*Adjust the recording level on the tape deck or VCR.

NOTE: To record picture from a video source and sound from another audio source, in step 4, first select a video source with an input selector switch on the front panel, and then select an audio source with the input selector keys on the remote control unit.

29