Yamaha DSP-AX1 REAR +, FRONT +, English, REAR CENTER, REAR CENTER +, ■Connecting a Front Subwoofer, PRE OUT/ MAIN IN SUBWOOFER MONO, ■Connecting the Front Effect Speakers

Right Front	Left Front
Effect Speaker	Effect Speaker
SPEAKERS
	FRONT
+	+
–	–
	REAR
+	+
–	–
+	+
–	–
CENTER	REAR CENTER

SPEAKERS
	FRONT
+	+
–	–
	REAR
+	+
–	–
+	+
–	–
CENTER	REAR CENTER

Right Rear			Left Rear
Speaker			Speaker
	Rear Center Speaker
		Subwoofer system

		PREOUT/MAIN IN
		FRONT
	IN
		REAR
REMOTE 1		(SURROUND)
	OUT	SUB
		WOOFER
REMOTE 2		SPLIT
		MONO
	IN	CENTER
		IN
	RB-	REAR CTR
Right	2320	CENTER	Left
		OUT
Subwoofer	RS	IN	Subwoofer
		MAIN
system	232C		system
	OUT	MAIN
	CTRL
100Ω	+5V	OUT
	20mA

Hookups

■Connecting the Front Effect Speakers

Connect the + and –terminals of your right and left Front Effect speakers to the L and R FRONT + and –terminals on this unit.

■Connecting the Rear and Rear Center Speakers

1Connect the + and –terminals of your right and left Rear speakers to the L and R REAR + and –terminals on this unit.

2Connect the + terminal of your Rear Center speaker to the REAR CENTER + terminal and the –terminal of your Rear Center speaker to REAR CENTER –terminal.

■Connecting a Front Subwoofer

Connect the signal input jack on your subwoofer to the PRE OUT/ MAIN IN SUBWOOFER MONO jack.

By connecting two Subwoofers to the SUBWOOFER SPLIT jacks, this unit can reproduce subtle directional changes in the low frequency sounds. When you use two Subwoofers, connect both of them to the SUBWOOFER SPLIT jacks using pin plugs.

Caution:

•The SUBWOOFER jacks (output) have a built-in high cut-off filter (90 Hz). When using a powered subwoofer, set the high cut-off frequency to “MAX” on your Subwoofer.

English

21