Speaker Output Levels
This section explains how to set the speaker output levels using the test tone generator. The Dolby Surround test is for balancing the output levels of the six speakers required for surround sound systems. The DSP test is for balancing the Front Effect speakers with the Main speakers for the DSP sound field programs.
English
Before You Begin
BASS | TREBLE | BALANCE | |||
1 | 0 | 1 | 0 | 1 | 0 |
1 | 1 | 1 | |||
2 | 2 | 2 | 2 | 2 | 2 |
3 | 3 | 3 | 3 | 3 | 3 |
4 | 4 | 4 | 4 | 4 | 4 |
– 5 | 5 + | – 5 | 5 + | L 5 | 5 R |
PARAMETER
SET MENU
10KEY DSP
1Set BASS, TREBLE and BALANCE on the front panel to “0” (the center position) and turn off BASS EXTENSION.
2Sit in the main listening position and set PARAMETER/SET MENU on the remote control to PARAMETER.
3Set 10KEY/DSP on the remote control to DSP and press 
/ DTS SUR.
4Press TEST on the remote control once or twice to select the test you want.
•Select “TEST DOLBY SUR.” to match the output levels of the Center, Rear Center and left and right Rear speakers to the left and right Main speakers.
•Select “TEST DSP” to match the output levels of the Front Effect speakers to the Main speakers.
27