Remote Control Features

Clearing Learned Functions, Macros, Renamed Displays,

and Manufacturer Setups

Advanced Operation

CLEAR

 

 

 

 

6CH INPUT

 

 

TITLE

%

 

 

 

%

ENTER

 

SOURCE

 

 

 

 

%

DISPLAY

MENU

%

SOUND

SELECT

SEARCH

–

+

%

!

!

$

 

POWER

REC

STOP

PAUSE

PLAY

/

 

 

*

#

For example, when DVD is selected as

the source component.

CLEAR

CLEAR

Notes:

1Press CLEAR using a ballpoint pen or similar object.

2Press %/%to select the clear mode. The mode is shown in the window in the following order:

(L: name of a component) Clears all learning functions of the component.

Clears all learning functions of the main unit control area (see page 50).

Clears all learning functions.

Clears all macros.

Clears all renamed displays in the display window.

Clears all programmed functions including manufacturer code presets. This returns to the factory presets.

3Press and hold CLEAR again for about 3 seconds.

•“C:NG” appears in the display window if the operation is unsuccessful.

4Press CLEAR to confirm clearing.

• Once you clear a learned function or macro from a button, the button reverts to its factory preset function or macro.

•If the remote control is without batteries for more than twenty minutes, or if worn out batteries remain in the unit, the contents of the memory may be cleared.

When the memory is cleared, insert new batteries and program any acquired functions that may have been cleared.

•“ERROR” appears in the display window for the following conditions: when pressing a button other than the cursor and ENTER; when pressing more than one button at once; and when one of MACRO ON/OFF, 10KEY/DSP, PARAMETER/SET MENU is switched to another position.

62