Yamaha DSP-AX1 ■1G. MAIN LEVEL, ■1F. FRNT EFCT SP (Front Effect Speaker Mode)

SET MENU Items

■1F. FRNT EFCT SP (Front Effect Speaker Mode)

The DSP-AX1 uses Front Effect speakers to localize the virtual sound sources of the sound field programs. If you do not use Front Effect speakers, you can direct the Front Effect signals to the Main speakers.

The OSD shows small or no Front Effect speakers depending on how you set this item. The initial setting is “YES”.

Select the “YES” setting if you use Front Effect speakers.

Select the “NONE” setting if you do not use Front Effect speakers. The Front Effect signals are mixed with the Main channels.

YES NONE

English

■1G. MAIN LEVEL

Change this setting if you cannot match the sound volume of the Front, Rear, and Center speakers with the Main speakers because of the unusually high efficiency performance of the Main speakers. The initial setting is “Normal”.

Select the “Normal” setting if you can match the volume of your effect speakers with the volume of your Main speakers using the Dolby Surround Test (page 28).

Select the “–10dB” setting if you cannot match the volume of your effect speakers with the volume of your Main speakers using the Dolby Surround Test (page 28).

Normal –10dB

Note:

• When this unit decodes 96 kHz sampling/24 bit digital signals or 6CH INPUT is on, level adjustments in items 1A~1F are not possible.

41