Hookups

Connecting External Amplifiers

If you want to increase the power output to the speakers, or want to use another amplifier, connect an external amplifier to the PRE OUT/ MAIN IN terminals as follows.

PREOUT/MAIN IN

FRONT

REAR

(SURROUND)

SUB

WOOFER

SPLIT

MONO

CENTER

IN

REAR CTR

CENTER

OUT

MAIN

IN

MAIN

OUT

English

~ MAIN jacks⁄ SUBWOOFER jacks

MAIN OUT jacks ..... Main channel line output jacks.

The signals output through these jacks are affected by BASS, TREBLE, BALANCE, and BASS EXTENSION settings.

MAIN IN jacks .......... Line input to the DSP-AX1 Main

channel amplifiers.

ŸCENTER jacks

CENTER OUT jack . Center channel line output jacks.

CENTER IN jack ..... Line input to the DSP-AX1 Center

channel amplifier.

!REAR CT jack

Rear Center channel line output jack.

Subwoofers reinforce very low frequencies.

MONO ......................

Main, Center and Rear channel

 

frequencies below 90 Hz are output

 

through this jack. You can also direct

 

DTS and Dolby Digital LFE signals to

 

this output.

SPLIT .......................

The SPLIT jacks output stereo

 

separation for the Main and Rear

 

channels and a split mono signal for the

 

Center and LFE channels.

Adjust the volume level of the subwoofer with the control on the subwoofer. Subwoofer volume cannot be adjusted from this unit. Depending on the settings in SET MENU items

1.SPEAKER SET, 3A. LFE LEVEL and 4A. LFE LEVEL, some signals may not be output from the SUBWOOFER jacks.

@ FRONT

Front Effect channel line output jacks.

¤ REAR (SURROUND)

Rear channel line output jacks.

Note:

•When RCA pin plugs are connected to the PRE OUT/MAIN IN output jacks for output to external amplifiers, the corresponding internal amplifiers will be muted.

23